Take the 2-minute tour ×
Android Enthusiasts Stack Exchange is a question and answer site for enthusiasts and power users of the Android operating system. It's 100% free, no registration required.

I'm currently running MIUI XJ (Gingerbread 2.3.5) with d2w on my HTC Desire with the 4GB sd card it was shipped with, but as I found the joy of the occasional ROM-switch, I found myself running out of storage on the sd card, which was filling up with alternate roms, flashable updates for said roms, nandroid backups of different roms, titanium backups, miui backups and, well, the stuff I'd actually like to use (photos, music).

So my question is: How can I safely replace an sd card with a bigger one, even if the original one is partitioned in a special way to make use of d2w? I realize I could simply partition the bigger sd card similarly to the original one, but what if I need a bigger sd-ext partition? (Which I, indeed, need for some Gingersense ROMs). Will the system simply accept the bigger partition or do I have to make a nandroid backup with the original sd card and reflash that backup once the bigger, partitioned sd card is mounted? Would the partitions remain untouched?
Would there be any considerable loss if I boot the system with the partitioned sd card with an empty ext-partition? As you can see, I don't even really know what sort of data is stored there.

EDIT:

So, I did it. My solution (not optimal, but worked. Keep in mind: With the HTC Desire, you can't switch SD cards while the battery is in, so no "on the fly" way. Also, I have no proper card reader lying around.):

  1. Backup of ALL the things (Nandroid backup, just in case, MIUI/Titanium Backup for apps+system settings (things stored on the sd-ext partition) and a full copy of the previous FAT32 partition)
  2. Put the new SD card in the phone and partition it (I used 4EXTRecovery so I could do it in the phone and increased the sd-ext partition from 256 to 1024mb)
  3. Mount the sd card on a computer, copy the contents of the old FAT32 to the new one (FAT32 partition should now be the same as before and it has your MIUI/TitaniumBackup on it)
  4. Boot the system (may be slow since there is now an empty data partition), when the system is up, you can restore your backups via MIUI Backup and/or Titanium Backup. I used Google to sync contacts and messages etc were synced with MIUI Backup, if you are not running a MIUI then you can use SMS Backup+ for messages.
  5. System is now the same as before, but the partitions are bigger :)

Recommended solution I stumbled upon that seems easier to me:

  1. Mount the sd card on a pc, open in the partitioning tool of your choice (I was told partition wizard would do the trick)

  2. Clone the sd card as a whole

  3. Apply that clone to the new sd card

  4. Increase the partitions as you like

  5. Put the new sd card in your phone. Should work exactly like before.

share|improve this question
    
The only thing I can think of is that the system might rely on the specific size of the partitions, but I'm not sure. –  Matthew Read Aug 18 '11 at 0:52
    
That's what I am afraid of :) I hope there's someone around here who has tried something similar. –  Jemus42 Aug 18 '11 at 11:28
add comment

1 Answer

up vote 2 down vote accepted

AFAIK the different partitions are identified by their ordering on the SD card. Therefore the standard FAT32 partition comes first, followed by the app/data partition (usually ext3 or ext4). Sometimes a swap partition follows as third partition.

If you use the same partition pattern (number of partitions and partition types) on the new sd-card there should be no problem. The partition sizes should not play a role - as long as you don't reduce the size. Just partition the sd-card, format the partitions and copy your data from your old sd-card over to the new.

share|improve this answer
    
Thanks, +1 for helpful info :) So, do you think I should copy the data of the ext-partition as well? (I'm just asking because that would mean that I need to get a linux live cd or something, since I'm running Mac OS X and Windows 7, bot without (native) ext4 support (as far as I know) –  Jemus42 Aug 18 '11 at 15:50
1  
I can confirm that the order and type of partitions is the only thing that matters. And yes, you will need to copy the contents of the Ext partition if you want to retain all apps and settings that reside there. –  Chahk Aug 18 '11 at 16:43
    
@Jemus42: If you already have installed a virtualization software like VMWare you can run the Linux system in the VM and only route the SD-Card reader (I assume it's an USB reader) into the VM. –  Robert Aug 18 '11 at 17:34
    
@Cahk: Thanks, I suspected something like that. / Robert: My USB card reader can't cope with the SD/MicroSD-adapter, so I'd need to use the phone. My recovery (4ext recovery, a CWM-derivative) supports usb sd access, so that might even work. Or I'll just get a proper card reader. But thanks for the VMware hint, got that lying around anyways :) –  Jemus42 Aug 18 '11 at 21:25
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.