Take the 2-minute tour ×
Android Enthusiasts Stack Exchange is a question and answer site for enthusiasts and power users of the Android operating system. It's 100% free, no registration required.

I've been fruitlessly trying to get the new Android OS update for my s2 for quite some time now and I finally thought my troubles were over when I saw an update for Samsung Kies pop up earlier today but now I'm just even more confused. Before there just wasn't an option to update (the update button was greyed out) but now the firmware update and initialisation button is no longer grey but comes up with the error notice:

GT-I9100 does not support initialising

What does this mean? I've spent quite a long time trawling through internet forums trying to find my answer to no avail; it seems no one out there has my problem. What does this error mean? Am I unable to update at all?

share|improve this question
    
I've had and heard of plenty of strange Kies problems. First, the basics; did you try 1) restarting your phone, 2) restarting your computer, and 3) reinstalling Kies? –  Mr. Buster Apr 4 '12 at 23:27
    
Which update? Can you be specific? (Help out future readers, eh?) –  Al E. May 9 '12 at 13:23

6 Answers 6

Also, make sure USB debugging is set to off. Find it in settings > Applications > Development

share|improve this answer

I was having the same issue, download the latest version of Kies (from the Samung website) and then retry.

This worked for me

share|improve this answer

This is the same situation as my own S2, I think that option becoming available is simply a bug in the latest Kies update. In all probability the Android 4.0 update (I assume) you are waiting on has not been released for you version of the handset yet.

share|improve this answer

On the same day you were having the problem mentioned on your question, a CNET article was being published covering the reason as to why you have the update option available but can't just wet perform the update.

Essentially, you'll be getting that message while operators are finishing tests to the update package, in order to make sure everything will work properly, as mentioned by Simon Stanford, VP of Samsung Telecommunications and Networks for Samsung UK and Ireland, speaking exclusively to CNET UK:

Galaxy S2 SIM-free owners last to get ICS, Samsung admits


Additionally, this is covered at Vodafone forums, and linked on page 15.

share|improve this answer

Yesterday I had the "firmware upgrade" button available and working (begins to download upgrade components etc) but my internet was playing up, so I tried again today and all of a sudden Kies was telling me "'GT-I9100T' does not support initialisation" (and upgrade component downloading window did not appear).

As suggested by Sparx, I checked my debugging setting. It was already unchecked, BUT I found that when I checked it, then unchecked it (the phone will prompt you to remove USB cable before you can toggle this option) it restored the "firmware upgrade" button.

Frustrations which remain:

  1. The process began again but stopped half way through, telling me that "phone battery is low, charge phone battery" (phone was plugged in via USB and charging already from computer). When I clicked OK, the process aborted and I am back at the Kies screen without a "firmware upgrade" button again (so will have to toggle the debugging option again - annoying, but faster than rebooting computer and/or phone).

  2. Kies doesn't tell you the download size - I have dialup broadband with a small bandwidth allowance and cannot afford to be downloading excessive amounts. It would be really helpful if we could discover the sizes of these upgrade downloads.

  3. Kies re-downloads firmware update process files (the ones before it starts downloading the actual upgrade files) each time I attempt to upgrade firmware - even if this was done 1 minute ago. I would think Samsung would have the programming prowess by now to cache these files rather than re-download them (for me, this also relates to issue #2).

I hope this helps others.

share|improve this answer

For comparison I set up a VM of windows xp 32 bit and installed kies, it recognized the firmware without issue (both an ACE2 and a Galaxy S3), kies on win 8 64 bit tells me both phones do not support initialization and the firmware cannot be upgraded (despite repeated re-installs and troubleshooting) !?!

My feeling from reading other posts and the above is KIES has problems with 64 bit environments

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.