Take the 2-minute tour ×
Android Enthusiasts Stack Exchange is a question and answer site for enthusiasts and power users of the Android operating system. It's 100% free, no registration required.

My research team is currently considering investing in a PandaBoard for Android b/c we are developing a custom kernel/sys-image and would like Linux terminal output.

Does the Pandaboard give me booting information? Such as printing kernel messages to the Linux terminal as the board loads up the system image? So for example, if the phone crashes, I can at least see how far the phone made it in the boot process.

share|improve this question
    
Is this related to this: android.stackexchange.com/questions/26123/… ? –  t0mm13b Jul 20 '12 at 18:38
    
Yes, I am trying to find some sure way of getting console output of the boot process. It seems that everything that I've tried so far relies on the phone booting successfully, which means there's no developing options available to non-Android developers when the phone doesn't make it to a stable state. I want to see what's going on inside the phone, but don't want to engage in hardware destroying practices such as soldering. We're trying to weigh the different options available. This one would cost money though, so we want to know what the PandaBoard can do. –  9exceptionThrower9 Jul 20 '12 at 18:43
    
It might be best to check out the google newsgroups specifically related to android-kernel and android-building, there is a lot of similar types of questions relating to pandaboard like what you're asking for... it might be helpful and worth your while to check as I feel the pandaboard related matters is a bit too localized for this forum.. :) –  t0mm13b Jul 20 '12 at 19:02

1 Answer 1

See this link for the general idea.

For verification, do the following steps:

  1. Connect DB9 to your host (PC) <------> Panda board (target). You need to connect with minicom and mini USB for adb shell.
    pc$ sudo minicom
  2. You should have adb shell for the Android SDK.
    pc$ export PATH=$PATH://android-sdk-linux/platform-tools
  3. Reboot the panda board.
    pc$ adb devices # to check the device is connected or not
    pc$ adb reboot   # to reboot

On minicom terminal, you will get logs of the reboot. At the end, it will ask you to hit a key to stop auto boot. This will tell you if the device is getting the image or not. If you want to boot manuually by using U-Boot terminal, press key so you will get U-Boot terminal.

 hardware_name# bootm 

This will help you a little bit.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.