Skip to main content
Android Enthusiasts

Return to Answer

grammar
Source Link
Andrew T. ♦
Andrew T. ♦
  • 16.5k
  • 10
  • 76
  • 127

I had the same issue, and iI tried to replacedreplace the screen and digitizer and it didn't work at all (spend money for nothing).

After a few weeks i, I was trying again. I touched the flex of the digitizer and it got crazy, like your picture. Then iI tried to took off the board which is connectconnected to this... when iWhen I put it again, the screen was fixfixed. ItIt's been OK for many days now.

So check the board and screw it property. IsIt is a little board where is the MiniSD card reader and the reset button, also has 2 flex, one of the digitizer and the other is grey and connectconnected to the main board.

I had the same issue, and i tried to replaced screen and digitizer and it didn't work at all (spend money for nothing).

After a few weeks i was trying again. I touched the flex of the digitizer and it got crazy, like your picture. Then i tried to took off the board which is connect this... when i put it again, the screen was fix. It been OK for many days now.

So check the board and screw it property. Is a little board where is the MiniSD card reader and the reset button, also has 2 flex, one of the digitizer and the other is grey and connect to the main board.

I had the same issue, and I tried to replace the screen and digitizer and it didn't work at all (spend money for nothing).

After a few weeks, I was trying again. I touched the flex of the digitizer and it got crazy, like your picture. Then I tried to took off the board which is connected to this. When I put it again, the screen was fixed. It's been OK for many days now.

So check the board and screw it property. It is a little board where the MiniSD card reader and the reset button, also has 2 flex, one of the digitizer and the other is grey and connected to the main board.

Source Link
user101776
user101776
  • 1

I had the same issue, and i tried to replaced screen and digitizer and it didn't work at all (spend money for nothing).

After a few weeks i was trying again. I touched the flex of the digitizer and it got crazy, like your picture. Then i tried to took off the board which is connect this... when i put it again, the screen was fix. It been OK for many days now.

So check the board and screw it property. Is a little board where is the MiniSD card reader and the reset button, also has 2 flex, one of the digitizer and the other is grey and connect to the main board.