I have an Coolpad Note 3 lite which is stuck in recovery mode. I am getting a "no command" error. The USB debugging of phone is disabled. Wiping off data and factory reset using recovery mode does not work. Also, the flashtool does not do anything. The phone is soft bricked, SO, help me guys.The details of my phone are:
1 Answer
You'll need the SP Flash tool
downloaded from here:
http://spflashtool.com/
Download coolpad note 3 lite stock ROM
from here
[removed dead link, do a Google search]
Important: Make sure you have your battery charged to at least 60% before executing these steps to reduce the chances of bricking your device.
Now follow these steps:
Extract the ROM zip.
Run SP Flash Tool.
Click on
scatter-loading
, Browse and select the scatter txt file from the extracted ROM zip.Click on the
download
butonturn off your device and connect to PC.
This should start flashing the ROM to your phone.
Wait till you get a
Download OK
dialog box.Now disconnect your phone & reboot.It'll be stuck in Fastmmi mode with "Up Down" written on screen.
Download
Minimal ADB and Fastboot Tool
and install.Launch
Minimal ADB and Fastboot Tool
Type in
adb devices
and make sure your device is listed.
If it's not listed, then make sure your device is connected properly and/or reboot your PC.
- Type in
adb shell fctest system reboot
If everything goes well, your phone should be unbricked now.
Note: If any of the links are down, a simple google search should bring you the required files.
Courtesy: