When my phone MOTOROLA G3(2015) is updated to Marshmallow, its not showing files when connected to PC. While connecting, it shows options as charing only, PTP, MTP, MIDI. When I select MTP, it shows the external card, but not showing the contents, where as internal memory is detected and all files are shown.
3 Answers
This is a well discussed and easy to fix bug... Disconnect USB cable, go to Settings, Apps, and Show System Apps and find External Storage and Media Storage and clear data and cache on each one and reboot, then give it 5 min after full boot up to rebuild media databases and connect to USB and select MTP. Should be good to go.
EDIT: In some instances where the SD card contains a large number of (media) files, it can take more than 5 minutes for the databases to rebuild. There is no way to see if the status of this database buildup in the phone itself, so sometimes you just have to be patient.
Also note that some users have stated that this is not sufficient by itself, but sometimes the system cache partition needs to be wiped and rebuilt. Official instructions for performing this operation from Moto are here. Note that this operation can take significant time... 5-15 minutes, occasionally even longer, do not interrupt the operation.
-
2I convert the sd card (16GB) as an internal storage but now when I connect to computer, it only show internal storage (8GB). How can I copy thing to my "sd card" from computer?– truongnmJan 31, 2016 at 10:12
-
1@truongnm This comment is not directly in regards to this question or answer. If you have a different question, please ask it in a separate question including all relevant details. This is not a discussion forum. Jan 31, 2016 at 13:03
-
1I have done all this, still its showing only external card. When connected to ubuntu, it shows external card and contents. Problem is with windows, i have installed the usb drivers, updated and troubleshooted it. Still nothing happens.. Feb 11, 2016 at 3:28
-
1I deleted cache and data for both "External Storage" ("Archivio esterno" in Italian) and "Media Storage" ("Archivio contenuti" in Italian) apps. Turned off the phone. Turned it on again. Changed from USB recharge mode to MTP, then back to USB recharge mode, then back to MTP. Still same problem, SD card content is not showing up... :( UPDATE: after several minutes, content is finally showing up!!!!– MDTJul 14, 2016 at 7:26
-
1Confirmed to be working on LG G3 6.0 containing 32GB SanDisk SD card filled with 17.85 GB of data, and waiting of 20 minutes right after rebooting.– Eido95Jun 11, 2017 at 17:53
After about 4 hours of installing drivers, wiping data & cache of apps, wiping cache partition, etc...
I found the solution was just to change USB option from 'MTP' to Charging
while USB was connected to the computer, then while still connected, change the USB option back to MTP
once more, voila!
Edit: How to find the USB options may vary between devices. On Samsung Galaxy devices, touch and drag the notification bar down, then tap "Connected as a <whatever-device-type-the-phone-is-currently-connected-as>".
-
1
After an update from motorola, it works..
-
2