1

I read the Using Hardware Devices page that describes how to connect your device to Android Studio that allows you to install and run your apps on your device. But I have a Xiaomi RedMi 2, and the link that they provide that allows you to download the OEM USB Driver for my device is all in Chinese. How do I install the required driver?

1

Below is the google translation: hope it works for you.

[Abstract] to install the driver, is the beginning of our wire brush, brush machine process is a very important step, but also a lot of local friends easily qualify problem areas. Just use a USB cable can not be achieved mobile phone and computer information exchange, but also need to drive.

Click here to download the millet phone drivers: http://bigota.d.miui.com/tools/xiaomi_usb_driver.rar

Install the driver, is the beginning of our wire brush, brush machine process is a very important step, but also a lot of local friends easily qualify problem areas. Just use a USB cable can not be achieved mobile phone and computer information exchange, but also need to drive.

First of all, I do not recommend to install the phone drivers to use wizard-driven software or pea pods, millet has provided official drivers, in my opinion, this driver should be the most secure, but with other software to install, simply by hardware identification to select the drive, and the identification is correct or not can not be 100% sure, this process is not artificially controlled, equivalent to drive right to choose to install a mindless software, I think it is not so reliable .

Driver installation is a wire brush and turn on USB debugging to operate the first step of the phone, very important, the situation is a lot of brush machine failures are caused by improper installation of the drive, I hope you pay attention to drive installation. I trust that, in the Device Manager under the windows of the hardware manager millet choose to install the official driver.

[Recognizes three modes] In the boot state, after off USB debugging connect the phone to a computer, mobile phone should be recognized as a portable device, and the USB debugging turned on, is recognized as androidphone and portable devices in fastboot mode is identified as fastbootinterface.

Under fastboot mode USB Debugging on mode USB Debugging OFF mode

[Specific installation steps] To turn on USB debugging mode, win7 system installation drive, for example, the installation steps as follows:

  1. USB debugging turned on the phone, connected to a computer, but right-click "Computer" (XP is "My Computer") → "Management" → Device Manager
  2. Right "android" → "Update Driver Software" → "Browse my computer for driver"
  3. millet phone to find driving compressed file, right - "pressure to the current folder", select millet phone drivers extract the folder "xiaomi_usb_driver", the next step
  4. jumped a security warning, click "Install this driver software"
  5. and then is done [Driver information] Driver installation, in fact, is to copy the driver files to the system folder, determine whether the driver is installed properly, you can view the information. Driver information fastboot mode Driver information open USB debugging mode. Close driver information USB debugging mode So far, my experience sharing driver installation is over, we want to help the old and new rice.

    Click here to download the millet phone drivers: http://bigota.d.miui.com/tools/xiaomi_usb_driver.rar

1

Install Mi PC Suite instead, it will work. It automatically installs the drivers.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.