0

I think i bricked my phone, my phones model number is "Micromax Canvas Spark Q380".

I've no OS installed, No Recovery Mode Installed.

Also fastboot and adb can't recognise my device on PC.

I've tried this : http://forum.xda-developers.com/gene...k-rom-t3131362 but it also didn't worked.

What to do?? any help please

10
  • Can you hear a sound when you connect the phone to computer?
    – esQmo_
    Commented Oct 31, 2016 at 20:17
  • yes i do but when do process of fastboot, then it says mp device found. Commented Oct 31, 2016 at 20:23
  • I don't get you there! You said no OS, no recovery, so the phone is not powering on, or if so, it is stuck in the splash screen, right?
    – esQmo_
    Commented Oct 31, 2016 at 20:26
  • it also not displaying splash screen. :( Commented Oct 31, 2016 at 20:29
  • its just blank, or dead. Commented Oct 31, 2016 at 20:29

2 Answers 2

0

For IMEI repairing on MTK devices, you'll need a tool called MAUI META 3G and BPLGU modem file

This tutorial explains it better.

0
2

Unbricking MTK devices is quite simple. You need the stock firmware and the flashtool.

  • Download the firmware here

  • SP Flashtool (the tool needed to flash the files)

  • Extract firmware zip file (I think the flashtool may be inside. If not, download it from here

  • Install USB Drivers. (VCOM or META drivers needed, get them here)

  • Open SP Flash Tool and click the Download tab button, select “Firmware upgrade” .

  • Click Scatter-Loading button & browse to the extracted firmware folder and select MT6582M_Android_scatter.txt file (It is a map file that tells the computer where each files can be sent in the phone)

  • Now hit the Download button.

  • Connect your phone to the PC with battery inside by USB cable (Drivers shall be installed)

  • After the flashing process succeed, a green tick will appear. Disconnect your phone and power it up.

Done.

12
  • 1
    Ahhh !!! I was skipped to install mediatek drivers, now i installed it and my phone is working like a charm. Thanks :) Commented Oct 31, 2016 at 21:31
  • Glad that I helped :)
    – esQmo_
    Commented Oct 31, 2016 at 21:35
  • hey wait, all is working fine but my sim is not showing its network. Its in a emergency call only mode. Commented Oct 31, 2016 at 21:58
  • Check if IMEI is present *#06#
    – esQmo_
    Commented Oct 31, 2016 at 21:59
  • No its not, It says "invalid". Commented Oct 31, 2016 at 22:02

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .