I have an IR touch frame device which I have to configure using the
idc file, however I am not sure if it is used at all.
I have changed the device type to
pointer which should show a cursor on the screen when operated, and it is not happening.
[ 76.937599] [0: khubd: 40] usb 1-1: new full-speed USB device number 2 using xhci-hcd [ 76.952845] [0: khubd: 40] usb 1-1: New USB device found, idVendor=1ff7, idProduct=0013 [ 76.952907] [0: khubd: 40] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 76.952955] [0: khubd: 40] usb 1-1: Product: FC49WH00DL-CT-B2-10P [ 76.953002] [0: khubd: 40] usb 1-1: Manufacturer: Touch Device [ 76.953045] [0: khubd: 40] usb 1-1: SerialNumber: 1000 [ 76.969757] [0: khubd: 40] input: Touch Device FC49WH00DL-CT-B2-10P as /devices/usb.25/ff600000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1:1.0/input/input5 [ 76.976113] [0: khubd: 40] hid-multitouch 0003:1FF7:0013.0004: input,hiddev0,hidraw3: USB HID v2.00 Mouse [Touch Device FC49WH00DL-CT-B2-10P] on usb-xhci-hcd.0.auto-1/input0
The file I've created is:
How can I make sure the file will be used?
Is it enough to reconnect the device to "reload" the changes in the file, or would I have to reboot the device?