Yeah, the DD command to the SD card was probably a mistake. For Android using DD method usually is like example only:
recovery.img in the root of your
/sdcard folder and rename it to
Run the following commands via ADB Shell or a terminal emulator app:
su dd if=/sdcard/cwm.img of=/dev/block/platform/omap/omap_hsmmc.1/by-name/recovery
However, according to this guide, it will brick your device if you do it this way because the recovery is on the
/boot partition. So not a good thing to try.
This guide was poorly written lacking detailed explanation. As far as the adb reboots stuff it looks like the developer could not get a handle on reboots so it's a bug.
The 2GB image can be used for installing ROMs and making backups. A 2GB image can be flashed on any sized SD card.
This is what I think you are trying to do. Example of using 2GB image SD card method:
cwm.img (if you can't open the file, use 7zip) and burn to SD card using win32diskimager (free) or winimage (shareware).
For Linux, use Etcher. These apps will need to be "run as administrator". Some internal laptop/desktop readers will not work, so to do this, you may need an external USB reader if you run into problems.
Once the card is done, copy any ROMs, or ZIPs you want to flash over to the card (simple copy and paste job).
- Turn your Nook off, insert the card and boot the nook. It should come up with CWM.
If you want to also replace the stock recovery with this developers CWM (personally I would not looks sketchy and cwm has been out of development for a very long time). It's a little unclear but from what I remember it goes like this. If an issue on this last part arise I will revise. I do not think one will though.
- Copy this developers
install_cwm_recovery_xx.zip from the downloads to the SD card (just a simple copy and paste job).
2.Now, boot into CWM by placing your newly made SD card in the device and turning it on.
- Go to and select the option Use the install zip from sdcard to install it (it just replaces uRecRam and URecImg in the
/boot partition. You can also do this manually if you want).
Now you should have CWM permanently on the device if you so choose.