2

One Gapps (pico and nano) errors with 64 when I try to install using twrp-3.3.1.4. I know I'm using the right version. I'm on a brand new One Plus 7 Pro.

##############################
  _____   _____   ___   ____  
 /  _  \ |  __ \ / _ \ |  _ \ 
|  / \  || |__) | |_| || | \ \
| |   | ||  ___/|  __/ | | | |
|  \ /  || |    \ |__  | | | |
 \_/ \_/ |_|     \___| |_| |_|
       ___   _   ___ ___  ___ 
      / __| /_\ | _ \ _ \/ __|
     | (_ |/ _ \|  _/  _/\__ \
      \___/_/ \_\_| |_|  |___/
##############################

Open GApps nano 9.0 - 20191017

- Mounting  /vendor

find: /system/system: No such file or directory
ls: /system/system: No such file or directory
- Gathering device & ROM information

***** Incompatible Device Detected *****

This Open GApps package cannot be
installed on this device's architecture.
Please download the correct version for
your device: arm

******* GApps Installation failed *******

- Copying Log to /sdcard

- NO changes were made to your device

Installer will now exit...

Error Code: 64
cp: can't stat '': No such file or directory
ls: /system/system: No such file or directory
cp: can't stat '/system/system/etc/g.prop': No such file or directory
cp: can't stat '/system/system/default.prop': No such file or directory
cp: can't stat '/system/system/build.prop': No such file or directory
cp: can't stat '/vendor/vendor/build.prop': No such file or directory
cp: can't stat '/data/local.prop': No such file or directory
cp: can't stat '/build.prop': No such file or directory
cp: can't stat '/system/system/addon.d/70-gapps.sh': No such file or directory
cp: can't stat '/cache/recovery/log': No such file or directory
__bionic_open_tzdata: couldn't find any tzdata when looking for CST6CDT,M3.2.0,M11.1.0!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
- Unmounting  /vendor

Updater process ended with ERROR: 64
I:Install took 9 second(s).
Error installing zip file '/sdcard/open_gapps-arm64-9.0-nano-20191017.zip'
Updating partition details...
I:Data backup size is 0MB, free: 227550MB.
I:Unable to mount '/usbstorage'
I:Actual block device: '', current file system: 'vfat'
...done
I:Set page: 'flash_done'
I:operation_end - status=1
I:TWFunc::Set_Brightness: Setting brightness control to 5
I:TWFunc::Set_Brightness: Setting brightness control to 0

3 Answers 3

2

I found that if upon receiving this error, before booting into LineageOS I can

  • Boot into the bootloader from TWRP,
    • Click on Reboot
    • Click on Bootloader
  • Boot into a new TWRP from the bootloader
    • Run twrp boot ./twrp.*.img
  • I can then install the gapps.

What cause this? Well my theory now is that the instructions on the Lineage OS suggest Wiping the System partition

  • Now tap Wipe.
  • Now tap Format Data and continue with the formatting process. This will remove encryption and delete all files stored in the internal storage.
  • Return to the previous menu and tap Advanced Wipe, then select the System partition and then Swipe to Wipe.

I was doing that and it was working for the purposes of installing LineageOS, but I believe after the Advanced Wipe on the System Partition something wasn't working. It's as if the wipe was complete and LineageOS could be installed, but mounting the partition after the install of LineageOS required rebooting into the recovery again. If you allow LineageOS to boot up before you flash GApps all bets are off. Worse this was the only way for it to work because if I rebooted into the recovery I would get the LineageOS recovery -- LineageOS now replaces TWRP entirely. I may have been able to install GApps from the LineageOS recovery's ADB Sideload option, but rebooting into TWPR recovery by proxy of the bootloader worked too.

3
  • 1
    So the main cause was the used TWRP version was too old?
    – Robert
    Oct 17, 2019 at 18:09
  • @Robert see the update. Oct 17, 2019 at 18:21
  • 1
    Same issue with my payton handset, rebooting into the bootloader from the initial LineageOS install TWRP boot & re-fastboot booting TWRP to (ab)use its ADB sideload work for me!
    – genpfault
    Oct 25, 2019 at 3:19
1

There are numerous reasons of why this could happen.

  • Have you mounted /system partition?
  • Try an older version of TWRP
  • Try SAR (System-as-root) version of recovery.
1
  • I tried mounting it and it was failing to mount, I also couldn't repair the partition in TWRP. I tried older versions of TWRP (from -4 to -1), and I tried newer versions. I also wasn't exactly sure what the SAR version of recovery meant but I seemed to get it working below. Thanks for the suggestions though. Oct 17, 2019 at 17:26
0

not the TWRP is the problem. I also had to search a long time. Although the processor is arm64 Architecture only the image Lineage OS is based on Android arm. Please try 11 arm Pico7 or Micro on Lineage OS 18.1 ??? or see this???

https://wiki.lineageos.org/gapps

cu SMorphin

1

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .