I have many working android cellphones with broken touchscreen but with a working screen and I would like to use them as computing device and/or additional screen. Is there a way to do that?


1 Answer 1


Provided your device has an unlockable bootloader and a custom recovery (I strongly advice against buying devices which are artificially destined to become useless, that should be prohibited by law), you should.

In any case I advice anyone worrying their device could break anytime to already have unlocked bootloader and activated wifi and adb (through network, if worrying about usb port breaking) at boot. Remember that if you are unlocking your bootloader for the first time doing so WILL DELETE all userdata and if you are not in Europe it could void your warranty.

First of all, proceed to install fastboot and adb on your pc, connect the device to the pc and then

  • unlock fastboot (the bootloader) on the device and flash the TWRP custom recovery (if no custom recovery is available you could somehow extract your base recovery image and enable adb and root access editing its default.prop);
  • boot recovery and open a shell with adb shell;
  • find system and userdata (and probably boot) partitions with fdisk -l /dev/block/mmcblk0;
  • mount system with mount -t ext4 <system_partition_file> <mountpoint>);
  • enabling debug is unnecessary cumbersome if you didn't have already enabled it.

    First try adding the following into system's build.prop:


    If that didn't work, you could try switching to 1 the adb_enabled setting in <data_partition_mount_point>/system/users/0/settings_global.xml.

    If even that didn't work, then you have to rebuild your boot image, properly editing the default.prop file to enable adb and then switching the adb_enabled setting like above.

    You can find information on how to do that here (keep in mind that it will probably require device-specific information like kernel_offset, ramdisk_offset, second_offset and tags_offset so you have to find those somewhere first).

    • unmount system and mount userdata;
    • add your adb server public key (placed into ~/.android/adbkey.pub) into userdata's /misc/adb/adb_keys (with a text editor or any other means) to skip device confirmation;
    • umount userdata and reboot the device;

Now that you can connect through adb, install scrcpy on your operating system and use the device remotely from your computer.

And if like me you forgot your pin code, you can disable it by moving the files starting with locksettings from /data/system. Remember that if you are using file-based encryption, moving or directly changing the pin in the sqlite3 database with

UPDATE locksettings SET value = '1' WHERE name = 'lockscreen.disabled';

will make your encrypted file inaccessible.


  • 1
    i follow your philosophy (and i do so on my own device), however there are good reasons to keep bootloader locked. also i don't recommend modified build.prop (scrcpy doesn't require root permissions). you should add some warnings about security risks (for example deleting locksettings.db breaks FBE and causes data loss)
    – alecxs
    Commented Mar 30, 2020 at 16:55
  • Added a disclaimer about unlocking bootloader. Sorry about FBE, I forgot to mention it because I stopped using it on android because last time I was encrypting my phone the phone rebooted half-way destroying the userdata partition. Commented Apr 1, 2020 at 9:29

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .