1

I have Samsung Galaxy S Blaze with the following specs

Samsung Galaxy S Blaze 4G SGH-T769
Android version = 4.0.4
Baseband version = T769UVMB1
Kernel version = 3.0.8-perf-T769ULVH5-CL990184 
Model Number = SGH-T769

I am following this thread on XDA as I had the same problem reported on page 4.

I am using AX88772 compatible USB to Ethernet adapter (plugable USB 2.0) and have successfully compiled drivers for Android ICS. I have also put the asix.ko into /system/lib/modules directory and loaded it with insmod.

I have connected the Samsung phone with Inateck USB 3.0 four-port hub where I have also connected plugable USB 2.0 ethernet adapter. But the ethernet is not working:

root@hammerhead:/ # netcfg eth0 up
netcfg eth0 up
action 'up' failed (No such device)

1|root@hammerhead:/ # netcfg
netcfg
rev_rmnet8 DOWN 0.0.0.0/0 0x00001002 72:21:40:52:3e:20
rev_rmnet4 DOWN 0.0.0.0/0 0x00001002 9e:5b:78:bd:4b:89
rev_rmnet2 DOWN 0.0.0.0/0 0x00001002 a6:e7:62:d2:fc:c5
rev_rmnet3 DOWN 0.0.0.0/0 0x00001002 8e:9d:a8:c7:cc:94
rev_rmnet7 DOWN 0.0.0.0/0 0x00001002 ea:82:2f:72:9d:fc
rev_rmnet5 DOWN 0.0.0.0/0 0x00001002 82:db:fe:b7:a9:1d
rev_rmnet6 DOWN 0.0.0.0/0 0x00001002 be:db:eb:ab:b3:17
rev_rmnet1 DOWN 0.0.0.0/0 0x00001002 ae:87:e2:c4:c8:4e
rev_rmnet0 DOWN 0.0.0.0/0 0x00001002 4a:49:58:b0:1d:e4
rmnet4 DOWN 0.0.0.0/0 0x00000000 00:00:00:00:00:00
rmnet2 DOWN 0.0.0.0/0 0x00000000 00:00:00:00:00:00
rmnet3 DOWN 0.0.0.0/0 0x00000000 00:00:00:00:00:00
rmnet7 DOWN 0.0.0.0/0 0x00000000 00:00:00:00:00:00
rmnet5 DOWN 0.0.0.0/0 0x00000000 00:00:00:00:00:00
rmnet6 DOWN 0.0.0.0/0 0x00000000 00:00:00:00:00:00
rmnet1 DOWN 0.0.0.0/0 0x00000000 00:00:00:00:00:00
rmnet0 DOWN 0.0.0.0/0 0x00000000 00:00:00:00:00:00
p2p0 DOWN 0.0.0.0/0 0x00001002 8e:3a:e3:4c:21:28\
sit0 DOWN 0.0.0.0/0 0x00000080 00:00:00:00:00:00
lo UP 127.0.0.1/8 0x00000049 00:00:00:00:00:00\
wlan0 DOWN 0.0.0.0/0 0x00001002 8c:3a:e3:4c:21:28

root@hammerhead:/ # ifconfig eth0
ifconfig eth0
eth0: No such device

There is no mention about OTG driver and USB host driver. Are they installed by default? How do I check if I have these installed? Or, are they not needed?

Thanks and a very happy new year.

  • Andrew T. THanks very much for edits. Best Regards – user2979872 Dec 31 '14 at 21:21
0

Well i got the solution. I was using inatek HB4004G USB3.0 four-port hub. I should have used on the go (OTG) cable instead. When i used the OTG cable, ethernet interface eth0 came up. Here is the OTG cable for your convenience.enter image description here

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.