2

I accidentally flashed a Qualcomm rom to a Pixel device.
After which, neither does my device not boot and nor does power button work. It is most likely hard brick😭.

Running lsusb shows: "Qualcomm, Inc. Gobi Wireless Modem (QDL mode)"

Is there any solution to fix this issue?
Someone please help me out.

This is the script I ran to flash the rom.
Output printed during flash is available at here.

After some research on internet, I found this tutorial.
Now I am able to put device in EDL mode.
On a Windows machine, I could see device under COMMS as Qualcomm HS-USB QDLoader 9008 (COM11).

What should I do next?

Improve this question
0

1 Answer 1

Reset to default
2

Yes. Qualcomm devices come with an Emergency Downloader EDL mode which helps to recover from a hardbrick. You need a Flashtool and Qualcomm EDL drivers. In order to access EDL mode, you need to use an EDL cable or short JTAG pins inside the phone.

Improve this answer
2
  • Hello Danish. Please go through How to Answer. Answers on this site are not only written for OP but also for future visitors who might end up with the same or a similar problem. If you help out a user via email than those future visitors would not have a useful answer for them. Consider adding all the necessary information in your post by editing it. Do not worry about it getting long. That's fine.
    – Firelord ♦
    Commented Oct 15, 2019 at 8:01
  • Sure, thanks. Have noted it down.
    – Danish Shakeel
    Commented Oct 15, 2019 at 8:03

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .