I am trying to resize the partition /system using the parted and gdisk commands. But none of these commands succeed in changing mmcblk0 partitions after execution.
The things I do are as follows:
- install adb and fastboot and put them to the system variables.
- enable Settings>developer options>USB debugging and Root debugging
- install TWRP recovery.
- run cmd in adminitsrator permission.
- write these command in CMD :
adb root
adb reboot recovery
adb push gdisk /sbin
adb push parted /sbin
adb shell chmod 777 /sbin/gdisk
adb shell chmod 777 /sbin/parted
adb shell
~#> cd /dev/block
dev/block> gdisk mmcblk0
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help): p
Disk /dev/block/mmcblk0: 61071360 sectors, 29.1 GiB
Sector size (logical/physical): 512/512 bytes
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 61071326
Partitions will be aligned on 2-sector boundaries
Total free space is 8158 sectors (4.0 MiB)
Number Start (sector) End (sector) Size Code Name
1 8192 38911 15.0 MiB 8300 apnhlos
2 38912 156543 57.4 MiB 0700 modem
3 156544 157567 512.0 KiB FFFF sbl1
4 157568 157631 32.0 KiB FFFF dbi
5 157632 157695 32.0 KiB FFFF ddr
6 157696 161791 2.0 MiB FFFF aboot
7 161792 162815 512.0 KiB FFFF rpm
8 162816 163839 512.0 KiB FFFF tz
9 163840 184319 10.0 MiB FFFF pad
10 184320 204799 10.0 MiB 8300 param
11 204800 233471 14.0 MiB 8300 efs
12 233472 239615 3.0 MiB FFFF modemst1
13 239616 245759 3.0 MiB FFFF modemst2
14 245760 268287 11.0 MiB FFFF boot
15 268288 294911 13.0 MiB FFFF recovery
16 294912 321535 13.0 MiB FFFF fota
17 321536 335853 7.0 MiB 8300 backup
18 335854 341997 3.0 MiB FFFF fsg
19 341998 341999 1024 bytes FFFF fsc
20 342000 342015 8.0 KiB FFFF ssd
21 342016 358399 8.0 MiB 8300 persist
22 358400 376831 9.0 MiB 8300 persdata
23 376832 5095423 2.3 GiB 8300 system
24 5095424 5709823 300.0 MiB 8300 cache
25 5709824 5730303 10.0 MiB 8300 hidden
26 5730304 61071326 26.4 GiB 8300 userdata
Command (? for help): d
Partition number (1-26): 26
Command (? for help):w
(curser blinking) and device goes to hang!!!!!
anyone can help me? I do this in parted command. It is like above.
after restarting the device, all of the partition are there, like before...
