0

So I turned on my nexus after maybe a year of inactivity. It was just in my cupboard, mostly because I installed a unstable mod and just wouldn't work. But I was able to fix it. And now it won't go beyond 11% on charging.

Please note that I am not using the original power adapter or the original USB lead to charge it.

Does anyone know how I solve this issue?

6
  • Two possibilities. 1-) Software problem 2-) Dead battery.
    – SarpSTA
    Commented Dec 4, 2015 at 11:24
  • @SarpSTA Can the batteries be replaced? Commented Dec 4, 2015 at 11:27
  • 1
    Probably. I don't know a lot about Nexus phones. I faced a very similar issue with my old Samsung SIII Mini which change of battery ultimately solved the problem. Don't use non-original charging kit though. Not only is it bad for your device, but it can create serious risks such as exploding due overheating or melt battery.
    – SarpSTA
    Commented Dec 4, 2015 at 11:34
  • @SarpSTA Why should non-original charger be bad for a device? Commented Dec 4, 2015 at 12:17
  • @Alex.S Lots of reasons. Quality of used material. Voltage and ampere values. To use original materials is always, always the smarter choice.
    – SarpSTA
    Commented Dec 4, 2015 at 12:21

1 Answer 1

1

Going through the suggestions, I am also inclined towards thinking it is a dead battery

Li Ion batteries have a protection circuit that kicks in when the discharge falls below a certain level. It requires certain current to be applied to it before charging can happen. This is called "Boosting". How to awaken sleeping Li-ion explains it and suggests ways

In case you don't have access to such chargers, try switching off the phone and then charging in the hope that it would get enough current to kick start charging. The battery is presumed dead, so leave it like 6 hours on charge in switched off condition

Coming to charger, I agree with what others have said but if you can see the phone charging rate from specs (e.g. gives 1600 mAh current to charge) and your current charger also gives the same or slightly higher, and is 2A , 5V wall charger, it is fine but don't make it a regular practice. In this case, I feel if the current reading is slightly higher it would actually help. This would answer more questions on using chargers meant for a different device Is my phone liable to explode if I charge it with a charger that came with a different phone?

All the best

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .