While installing LineageOS on my Samsung Galaxy Tab S6 Lite, I have ended up with a blue screen that says "An error has occurred while updating the device software." There is also a text in red in the top corner that says: "VOLTAGE Level [2934]" While looking online, it appears to me that I am supposed to use odin (or jodin3 for me, a linux user) and then flash the device firmware. However all these instructions appear to be in the Download mode, which I can not seem to be able to get to.
The bootloader is unlocked but the tablet is not rooted.
I can not figure out how to get into Download mode on this device. I have fastboot and heimdall installed, as well as adb however the problem is that none of these are able to get the device into download mode.
In my /var/log/messages/ I get:
Feb 12 09:42:04 localhost kernel: usb 3-2.3: new high-speed USB device number 97 using xhci_hcd
Feb 12 09:42:09 localhost kernel: usb 3-2.3: device descriptor read/64, error -110
Feb 12 09:42:25 localhost kernel: usb 3-2.3: device descriptor read/64, error -110
Feb 12 09:42:25 localhost kernel: usb 3-2.3: new high-speed USB device number 98 using xhci_hcd
Feb 12 09:42:25 localhost kernel: usb 3-2.3: device descriptor read/64, error -71
Feb 12 09:42:25 localhost kernel: usb 3-2.3: device descriptor read/64, error -71
Feb 12 09:42:25 localhost kernel: usb 3-2-port3: attempt power cycle
Feb 12 09:42:26 localhost kernel: usb 3-2.3: new high-speed USB device number 99 using xhci_hcd
Feb 12 09:42:26 localhost kernel: usb 3-2.3: Device not responding to setup address.
Feb 12 09:42:26 localhost kernel: usb 3-2.3: Device not responding to setup address.
Feb 12 09:42:26 localhost kernel: usb 3-2.3: device not accepting address 99, error -71
Feb 12 09:42:26 localhost kernel: usb 3-2.3: new high-speed USB device number 100 using xhci_hcd
Feb 12 09:42:26 localhost kernel: usb 3-2.3: Device not responding to setup address.
Feb 12 09:42:27 localhost kernel: usb 3-2.3: Device not responding to setup address.
Feb 12 09:42:27 localhost kernel: usb 3-2.3: device not accepting address 100, error -71
Feb 12 09:42:27 localhost kernel: usb 3-2-port3: unable to enumerate USB device
Any suggestions? THanks again in advance, for any and all help!
Volune Up + PowerorVolume Up + Down(it is only one button with areas for up and down) do nothing, butVolume Down + Powermakes the screen go blank before coming back with the blue screen (there is however a flicker for one time when it comes back).VOLTAGE Level [2934]indicates on the top left of the screen.